JetStor SAS 816F(D)

JetStor-8XXF-156-20190730

Notice:  File is in archive format. After downloading, you will need to unpack its contents in order to use it.

Please upgrade all files in the following order:

  1. Master Boot “MBRO”
  2. Boot
  3. Firmware

Upgrading Single Controller:   If upgrading from Version 1.51 or earlier, Please Power Cycle Raid Unit. If upgrading from Version 1.52 or later, reboot the controller.  Host access to Volumes must be stopped during the firmware upgrade and restart the controller.

Upgrading Dual Controllers:  After upgrading the firmware, power cycle the unit. Host access to Volumes must be stopped during firmware upgrade.

Rate This Article

(7 out of 22 people found this article helpful)

Leave A Comment?