JetStor SAS 712F(D)_716F(D)_724F(D)_742F(D)_764F(D) – V1

JetStor-7xxFv1–1.55

Notice:  File is in archive format. After downloading, you will need to unpack its contents in order to use it.

Please upgrade all files in the following order:

  1. Master Boot “MBRO”
  2. Boot
  3. Firmware

Upgrading Single Controller:   If upgrading from Version 1.51 or earlier, Please Power Cycle Raid Unit. If upgrading from Version 1.52 or later, reboot the controller.  Host access to Volumes must be stopped during firmware upgrade and restart controller.

Upgrading Dual Controllers:  After upgrading the firmware, power cycle the unit. Host access to Volumes must be stopped during firmware upgrade.

Rate This Article

Up Down
(17 out of 61 people found this article helpful)

Leave A Comment?